Arema Tie Plate for Trian Rail
|FOB Price:||US $99 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $99/ Piece|
|Production Capacity:||300, 000PCS/Year|
|Transport Package:||Wooden Packing|
|Payment Terms:||L/C, T/T|
- Model NO.: AREMA
- Certification: AREMA, TB
- Bolt Grade: Hot-Rolled Steel
- Warranty: >3 Years
- Battery Life: No
- Color: Customized
- Material: Steel
- Used for: Trian Rail Component
- Size: 16" Plate
- Specification: 20T
- Type: Rail Component
- Part: Railway Rail
- Age: Rail
- Charge Time: No
- Power: No
- The Type: Single or Double Shoulder
- Spec: Arema
- Method: Hot Rolling
- Trademark: Tedrail
- Origin: China
TIE PLATES FOR AREMA SPEICIFCATION
The use of single or double shoulder tie plates makes a more stable track and greatly lengthens the life of wood ties. Punched and sheared from hot-rolled steel sections, tie plates provide proper cant, uniform bearing surface for the ail and better load distribution to the ties. They hold the rail to gauge, providing more uniform wear to rail head and rotect against undue wear to ties. Tie plates are designed with a long end or field end to be located outside of the rails. In the case of single shoulder tie plates, the shoulder is placed on the field end of the plate. The gauge end or short end of the plate is located inside of the rails. When ordering ,identification of the rail section or the width of the rail base should be specified. Quality relaying tie plates are also available from our stocks which offer appreciable savings on railroad track age and industrial sidings.
u Product Type: Single Shoulder Tie Plate / Double Shoulder Tie Plate
u Production: Hot Rolled, Sheared and Punched
u Specification: AREMA
u Material: Low Carbon Steel - AISI 1020, 1030; High Carbon Steel - AISI 1045, 1060
u Surface Cover: Black, Coating, Hot Dip Galvanized.
u Type and sizes are listed on the following tables, Weight based on 8-hole 7-3/4" wide plate, except plan 1 and 2; UP/CN 16" plate is 6-hole
|AREMA Plan No.||Part Type||PUNCHING||Single Shoulder(SS)||Length||Weight||Rail||Rail Base Width|
|1||10 Inch||A & B||SS||10||11.63||90 RA-A||5-1/8|
|2||11 Inch||A & B||SS||11||12.93||90RA-A||5-1/8|
|3||12Inch||A & B||DS||12||15.86||100RE||5-3/8|
|5||12Inch||A & B||DS||12||16.25||119RE/115RE||5-1/2|
|7||13Inch||A & B||DS||13||19.6||119RE/115RE||5-1/2|
|10||13Inch||A & B||DS||13||17.87||140RE/136RE/133RE/132RE||6|
|12||14Inch||A & B||DS||14||21.47||140RE/136RE/133RE/132RE||6|
Tie plates are generally used to take the load of rail and distribute the load to the sleepers offering proven economies. We manufacture all types of base plates suitable for various rail sections, for use on wooden, steel or concrete sleepers and ballast-less tracks used with elastic fastenings on wooden sleepers and 'K' type fastening system.
Cast iron can be the welded or fabricated type, depending upon the customers' requirements. Our rail tie plate can be made to suit various rail section, i.e. UIC 60, UIC 54, RN 45, 90 A, etc.
Tie plate or sole plates are needed in rail installation, as they not only support the rails, but also enable the entire fastening system to be fixed on. Rail tie plates are the uppermost component of a crane rail or track support system. The primary function of a tie plate or sole plate is to provide the rail with a flat, smooth resting surface while allowing for vertical alignment of the rail system. Tie plates are secured by Anchor Bolts, also known as Holding Down Bolts. Soleplates are typically installed with a layer of grout cast beneath, which fills the void between the soleplate and the concrete foundation.
The holes for bolting the anchor and leveling bolts, and holes for bolt through clips if present, are precisely drilled into the sole plates. For weldable clips and base clips, the bottom of the clip is welded onto the sole plates before galvanizing.
We can manufacture any quantities big or small and try to accommodate our customers' requests, although it is more economical to manufacture larger quantities.
Below are some examples of rail tie plate we have manufactured over the last several years.
|Rph 1/160||345/285/127/160x15/13||Ø 26 (4x)||1:40||S 49/S 54||7,86|
|Rp 01/01/160||345/285/127/160x15/13||Ø 26 (4x)||1:40||S 49/S 54||7,70|
|Rph 1/210||345/285/127x210x15/13||Ø 26 (4x)||1:40||S 49/S 54||10,55|
|Rph 1/210||345/285/127x210x15/13||Ø 36,3 (2x)||1:40||S 49/S 54||10,55|
|Rph 1/210 FVZ||345/285/127x210x15/13||Ø 26 (4x)||1:40||S 49/S 54||10,69|
|Sph 1(a)||345/350/127x410x15/13||Ø 26 (8x)||1:40||UIC 60||20,60|
|Rph 6/160||370/310/152x160x15/13||Ø 26 (4x)||1:40||UIC 60||8,44|
|Rph 6/210||370/310/152x210x15/13||Ø 26 (4x)||1:40||UIC 60||11,32|
|SZ 60||370/350/152x420x15/13||Ø 26 (8x)||1:40||UIC 60||22,73|
|Rph 11 Ü||664/554x160||Ø 26 (4x)||1:40||S 54||15,37|
|Rph 13 Ü||690/570x160||Ø 26 (4x)||1:40||UIC 60||15,27|
|Rpo 5||345/285/127x160x15/13||Ø 26 (4x)||1:20||S 49/S 54||8|
As a leading manufacturer of rail fastening based in China, Tedrail also produces many other railway fasteners, such as track bolt, sleeper screw, rail joint bar, rail anchor, rail clip, elastic rail clip, SKL tension clamp, rail shoulder, and so on.